Special Package of Chlorine Dioxide Powder for Aquaculture Water Treatment

Chlorine dioxide powder [special package for aquaculture water treatment]

As a water treatment agent, this product has the functions of purifying water quality, inhibiting the reproduction of harmful algae, deodorizing, and improving the anaerobic environment at the bottom of the pool. It also has the advantages of small dosage, low cost, high safety factor, low odor, and convenient use.

Introduction

Product Description	This product is a water treatment agent with chlorine dioxide as its main effective component.
Characteristics	This product is a white or slightly yellow powder with an irritating odor of hypochlorous acid.
Functions and Applications	As a water treatment agent, this product has the functions of purifying water quality, inhibiting the reproduction of harmful algae, deodorizing, and improving the anaerobic environment at the bottom of the pool. It also has the advantages of small dosage, low cost, high safety factor, low odor, and convenient use.
Specifications	The content measured by the pyromucic acid method is 8% - 10%; the content measured by the five-step iodometric method is 2.8% ± 0.28%.
Packaging	500g/bag
Execution Standard	Q/0724 SHS 010
Storage	Seal up and store independently in a dry, ventilated, cool place away from flammable materials.
Shelf Life	24 months

Usage and Dosage

First, measure 10 times the weight of the powder in water into a plastic bucket. Then, slowly pour the chlorine dioxide powder into the water and stir evenly. Cover and let it stand for 15 - 25 minutes until the solution turns dark yellow. Then dilute it 2000 times with water and evenly sprinkle it across the whole pool. You can refer to the following table for solution preparation. (Do not use when there are aquaculture organisms floating on the water surface; do not use simultaneously with disinfectants; it is better to use in the evening or without sunlight.)

Then evenly sprinkle it across the whole pool. You can refer to the following table for solution preparation. (Do not use when there are aquaculture organisms floating on the water surface; do not use simultaneously with disinfectants; it is better to use in the evening or without sunlight.)

Disinfection Object	Dosage	Usage
Slightly polluted water	60g - 90g/acre·meter	Sprinkle evenly across the whole pool every 10 - 15 days
Heavily polluted water	60g - 90g/acre·meter 70g - 100g/acre·meter	Sprinkle evenly across the whole pool every 10 - 15 days
Heavily polluted water	80g - 120g/acre·meter	When the pollution is severe, use it every other day
Pond cleaning and disinfection	100g - 200g/acre·meter	Sprinkle evenly across the whole pool

Precautions

1、Do not use metal utensils to prepare or hold the solution.

2、The usage and dosage are for reference only. The specific dosage should be adjusted according to the degree of water pollution.

3、When preparing, be sure to add water first and then add the chlorine dioxide powder; never reverse the order. And do not operate in sunlight or a flammable and explosive environment.

4、If the packaging is damaged, it is strictly prohibited to store and transport. Do not store or transport together with acidic substances.

5、This product is a single-package product. If it gets damp, chlorine dioxide gas will be directly released, which may cause expansion and self-ignition. Therefore, it must be stored independently in a dry, ventilated, cool place away from flammable materials.

6、Dispose of the used packaging properly and do not litter.