Stabilized Chlorine Dioxide Sterilizer Powder Content 26% A&B Compent Used In Drinking Water Treatment

Chlorine dioxide disinfectant powder Ⅱ type (23.4%~28.6%) (A agent) 26% for drinking water only A agent-1000g bag

Chlorine dioxide disinfectant powder Ⅱ type (23.4%~28.6%) (A agent) 26% for drinking water only b agent-1000g bag

Product Specification

Binary disinfectant powder ， 1000g / bag

Main Active Ingredients and Content

This product is chlorine dioxide as the main active ingredient of the A agent, B agent disinfection powder, B agent for supporting the activator. The content of chlorine dioxide is 23.4%~28.6% by five-step iodometric method,

Killing microorganisms

Effective Against bacteria, E. coli, etc.

Introduction

Product Name	XiuBa Brand Chlorine Dioxide Disinfectant Powder Type Ⅱ Content (23.4%~28.6%) 26% Drinking Water-1000g bag
Product specification	Binary disinfectant powder, 1000g / bag
Main active ingredients and content	This product is chlorine dioxide as the main active ingredient of the A agent, B agent disinfection powder, B agent for supporting the activator. The content of chlorine dioxide is 23.4%~28.6% by five-step iodometric method.
Microorganisms Killed	Effective Against bacteria, E. coli, etc.
Scope of use	It is suitable for disinfection of drinking water (including secondary water supply).

How to use

Open Type II Agent A chlorine dioxide disinfectant powder and pour it into a plastic or ceramic container with 18 times its weight in water (strictly prohibited: adding water to powder).Stir until Agent A is fully dissolved. Due to its high concentration, slowly pour an equal amount of Agent B (activator) into the solution while stirring to the bottom of the container.Cover and let react for 60–90 minutes (water temperature: 20–25°C) to obtain a 12,300–15,000 mg/L chlorine dioxide solution. Then referring to GB26366 “Chlorine Dioxide Disinfectant Hygiene Standards”, in the disinfection of drinking water and secondary water supply the dosage concentration of chlorine dioxide is 0.5~2mg/L, and the action time is 15~30 minutes. The user can also discretionarily increase or decrease the concentration depending on the water quality conditions according to GB5749 “Drinking Water Hygiene Standards”.

Precautions

1、It is strictly forbidden to mix the Agent A and B powders directly together.

2、It should not be mixed with other disinfectants, alkali or organic substances.

3、This product has bleaching effects.

4、This product is corrosive to metal.

5、Wear personal protective equipment during use to avoid contact with high-concentration disinfectant on the skin or inhalation into the respiratory tract. If the disinfectant accidentally comes into contact with the eyes, rinse immediately with water and seek medical attention for severe cases

6、Store in a cool, dry, ventilated, and dark place, away from flammable or explosive materials.

7、For external use only. Do not ingest. Keep out of reach of children.