Stable Chlorine Dioxide Disinfection Powder Content 6% Used in Hospital Sewage Powder-1000g Bag

Chlorine dioxide disinfection powder 6% hospital sewage powder-1000g bag

Main Active Ingredients and Content

This product is a disinfectant powder with chlorine dioxide as the main active ingredient. The chlorine dioxide content is 6% ± 0.6% (five-step iodometric method).

Killing microorganisms

Effective Against Escherichia coli, Salmonella, and Shigella.

Introduction

Product Name	Xiuba Brand Chlorine Dioxide Disinfection Powder Content 6% Hospital Sewage -1000g Bag
Main Active Ingredients and Content	This product is a disinfectant powder with chlorine dioxide as the main active ingredient. The chlorine dioxide content is 6% ± 0.6% (five-step iodometric method).
Microorganisms Killed	Effective Against Escherichia coli, Salmonella, and Shigella.
Scope of use	Suitable for disinfecting hospital sewage and various types of sewage.
Effective period	12 months.
Storage conditions	Cool, dry, ventilated, dark, and stored separately from flammable or explosive materials.

Usage Instructions

Prepare a deep plastic bucket and add water equivalent to 15 times the weight of the disinfectant powder. Slowly pour the chlorine dioxide disinfectant powder into the water while stirring (strictly prohibit adding powder before water!). Ensure the water level is significantly below the bucket rim to prevent overflow. After stirring to dissolve, cover and let stand for 50–60 minutes (water temperature: 20°C–25°C) to obtain a 4000 mg/L chlorine dioxide stock solution. Refer to GB26366 "Hygienic Standard for Chlorine Dioxide Disinfectants" for hospital sewage disinfection. The recommended chlorine dioxide dosing concentration is 20–40 mg/L, with a contact time of 30–60 minutes. Adjust the concentration as needed based on water quality and GB18466 "Emission Standard of Water Pollutants for Medical Organizations."

Precautions

1. For external use only. Do not ingest. Keep out of reach of children.

2. When the chlorine dioxide concentration exceeds 2000 mg/L, it may strongly corrode or bleach metals and fabrics.

3. In case of contact with skin, mucous membranes, or eyes, rinse immediately with water and seek medical attention.

4. Use plastic or ceramic containers for preparation. Always add water first, then powder (never pour water into the powder). Wear personal protective equipment to avoid direct skin contact with concentrated solutions.

5. Prepare the solution for immediate use. Use within 24 hours after opening.

6. Store in a cool, dry, ventilated, and dark place, away from flammable or explosive materials. Moisture may cause gas release, leading to bag expansion or spontaneous combustion.