Stability Solid Chlorine Dioxide Disinfectant Powder AB for Drinking Water Treatment Purification（Matching Activator）

Pour chlorine dioxide disinfectant powder A agent into a plastic container or porcelain containing 24 times the amount of water (it is strictly prohibited to pour the water into the powder), pour the supporting activator B agent into another plastic container or porcelain containing 24 times the amount of water (it is strictly prohibited to pour the water into the powder), and then slowly mix the A liquid, B liquid in a container, and leave it to react for 60~90 minutes, that is, to get 3240~3960 mg/L chlorine dioxide solution. Then referring to GB26366 “Chlorine Dioxide Disinfectant Hygiene Standards”, in the disinfection of drinking water and secondary water supply the dosage concentration of chlorine dioxide is 0.5~2mg/L, and the action time is 15~30 minutes. The user can also discretionarily increase or decrease the concentration depending on the water quality conditions according to GB5749 “Drinking Water Hygiene Standards”.

1、Strictly forbidden to pour the matching activator B agent directly into the A agent.

2、It should not be mixed with other disinfectants, alkali or organic substances.

3、This product has bleaching effect.

4、This product is corrosive to metal.

5、 Wear gloves when using to avoid high concentrations of disinfectant contacted with the skin and inhaled to the respiratory tract; if the disinfectant inadvertently contact with the eyes, it should be immediately flushed with water, and in serious cases, should be referred to a doctor.

6、Placed in a cool, dry, ventilated and dark environment, keep it away from flammable and explosive products, and stored independently.

7、Disinfectant for external use should not be taken orally. Keep out of reach of children.