Stabilized Chlorine Dioxide Disinfection Powder Content 46% Part A&B for Water Treatment Purification In Waterplants

Chlorine dioxide disinfectant powder Ⅱ type (41.4%~50.6%)(A agent) 46% for drinking water only A agent-1000g/bag

Chlorine dioxide disinfectant powder Ⅱ type (41.4%~50.6%)(A agent) 46% for drinking water only B agent-1000g/bag

Binary disinfectant powder A agent 1000g/bag 【Main active ingredients and content】 This product is chlorine dioxide as the main active ingredient of the A agent, B agent disinfection powder, B agent for supporting the activator. The content of chlorine dioxide is 41.4%~50.6% by five-step iodometric method.

Product Specification

Binary disinfectant powder A agent 1000g/bag

Main Active Ingredients and Content

This product is chlorine dioxide as the main active ingredient of the A agent, B agent disinfection powder, B agent for supporting the activator. The content of chlorine dioxide is 41.4%~50.6% by five-step iodometric method.

Killing microorganisms

Effective Against bacteria, E. coli, etc.

Introduction

Product Name	XiuBa Brand Chlorine Dioxide Disinfectant Powder Type Ⅱ (41.4%~50.6%) Drinking Water -1000g/bag
Product Specification	Binary disinfectant powder 1000g/bag
Main Active Ingredients and Content	This product is chlorine dioxide as the main active ingredient of the A agent, B agent disinfection powder, B agent for supporting the activator. The content of chlorine dioxide is 41.4%~50.6% by five-step iodine dosage method.
Microorganisms Killed	Effective Against bacteria, E. coli, etc.

How to use

Prepare a deep plastic bucket or dedicated dosing equipment. Pour Type II Agent A chlorine dioxide disinfectant powder into the container holding 100 times its weight in water (strictly prohibited: adding water to powder). Due to the high concentration, ensure Agent A is completely dissolved by thorough stirring. While stirring to the bottom, slowly add an equal amount of matching Activator B (strictly prohibited: never mix dry A and B powders directly!) Keep the liquid level well below the container rim to prevent overflow. Cover and let stand for 35-45 minutes (water temperature: 20°C-25°C) to obtain a 4,100-5,010 mg/L chlorine dioxide solution. Then referring to GB26366 “Chlorine Dioxide Disinfectant Hygiene Standards”, in the disinfection of drinking water and secondary water supply the dosage concentration of chlorine dioxide is 0.5~1mg/L, and the action time is 15~30 minutes. The user can also discretionarily increase or decrease the concentration depending on the water quality conditions according to GB5749 “Drinking Water Hygiene Standards”.

Precautions

. It is strictly forbidden to mix the Agent A and B powders directly together.

2. It should not be mixed with other disinfectants, alkali or organic substances.

3. This product has bleaching effects.

4. This product is corrosive to metal.

5. Wear personal protective equipment during use to avoid contact with high-concentration disinfectant on the skin or inhalation into the respiratory tract. If the disinfectant accidentally comes into contact with the eyes, rinse immediately with water and seek medical attention for severe cases

6. Store in a cool, dry, ventilated, and dark place, away from flammable or explosive materials.

7. For external use only. Do not ingest. Keep out of reach of children.